Drug Targeting to Macrophages With Solid Lipid Nanoparticles Harboring Paromomycin: an <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation Against <Emphasis Type="Italic">L. major</Emphasis> and <Emphasis Type="Italic">L. tropica</Emphasis>

Leishmaniasis is a worldwide disease that leads to high mortality and morbidity in human populations. Today, leishmaniasis is managed via drug therapy. The drugs that are already in clinical use are limited to a number of toxic chemical compounds and their parasite drug resistance is increasing. It is therefore essential, in order to circumvent the current difficulties, to design a new anti-leishmanial drug treatment strategy. Besides producing new, active anti-leishmanial entities, another promising strategy could be developing novel delivery systems and formulations of the existing pharmaceutical ingredients to improve drug efficacy. In the present study, paromomycin sulfate (PM), as one of the promising anti-leishmanial drugs, was formulated in solid lipid nanoparticles (SLN), and its in vitro efficacy was investigated against different strains of Leishmania using a MTT test, Parasite-Rescue-Transformation-Assay, SYTO Green staining, and fluorescent microscope imaging. The results show that PM-loaded SLN is significantly more effective than PM in inhibiting parasite propagation (P?<?0.05) and that cytotoxicity of PM-SLN formulations is size dependent. According to our results, delivery of the drugs to the macrophages via nanoparticle utilization seems to be an accessible and practical approach.     

Thermal Processing of PVP- and HPMC-Based Amorphous Solid Dispersions

Thermal processing technologies continue to gain interest in pharmaceutical manufacturing. However, the types and grades of polymers that can be utilized in common thermal processing technologies, such as hot-melt extrusion (HME), are often limited by thermal or rheological factors. The objectives of the present study were to compare and contrast two thermal processing methods, HME and KinetiSol® Dispersing (KSD), and investigate the influence of polymer type, polymer molecular weight, and drug loading on the ability to produce amorphous solid dispersions (ASDs) containing the model compound griseofulvin (GRIS). Dispersions were analyzed by a variety of imaging, solid-state, thermal, and solution-state techniques. Dispersions were prepared by both HME and KSD using polyvinylpyrrolidone (PVP) K17 or hydroxypropyl methylcellulose (HPMC) E5. Dispersions were only prepared by KSD using higher molecular weight grades of HPMC and PVP, as these could not be extruded under the conditions selected. Powder X-ray diffraction (PXRD) analysis showed that dispersions prepared by HME were amorphous at 10% and 20% drug load; however, it showed significant crystallinity at 40% drug load. PXRD analysis of KSD samples showed all formulations and drug loads to be amorphous with the exception of trace crystallinity seen in PVP K17 and PVP K30 samples at 40% drug load. These results were further supported by other analytical techniques. KSD produced amorphous dispersions at higher drug loads than could be prepared by HME, as well as with higher molecular weight polymers that were not processable by HME, due to its higher rate of shear and torque output.     

Rapid Assessment of Tablet Film Coating Quality by Multispectral UV Imaging

Chemical imaging techniques are beneficial for control of tablet coating layer quality as they provide spectral and spatial information and allow characterization of various types of coating defects. The purpose of this study was to assess the applicability of multispectral UV imaging for assessment of the coating layer quality of tablets. UV images were used to detect, characterize, and localize coating layer defects such as chipped parts, inhomogeneities, and cracks, as well as to evaluate the coating surface texture. Acetylsalicylic acid tablets were prepared on a rotary tablet press and coated with a polyvinyl alcohol-polyethylene glycol graft copolymer using a pan coater. It was demonstrated that the coating intactness can be assessed accurately and fast by UV imaging. The different types of coating defects could be differentiated and localized based on multivariate image analysis and Soft Independent Modeling by Class Analogy applied to the UV images. Tablets with inhomogeneous texture of the coating could be identified and distinguished from those with a homogeneous surface texture. Consequently, UV imaging was shown to be well-suited for monitoring of the tablet coating layer quality. UV imaging is a promising technique for fast quality control of the tablet coating because of the high data acquisition speed and its nondestructive analytical nature.     

Optimising Drug Solubilisation in Amorphous Polymer Dispersions: Rational Selection of Hot-melt Extrusion Processing Parameters

The aim of this article was to construct a T–ϕ phase diagram for a model drug (FD) and amorphous polymer (Eudragit® EPO) and to use this information to understand the impact of how temperature–composition coordinates influenced the final properties of the extrudate. Defining process boundaries and understanding drug solubility in polymeric carriers is of utmost importance and will help in the successful manufacture of new delivery platforms for BCS class II drugs. Physically mixed felodipine (FD)–Eudragit^® EPO (EPO) binary mixtures with pre-determined weight fractions were analysed using DSC to measure the endset of melting and glass transition temperature. Extrudates of 10 wt% FD–EPO were processed using temperatures (110°C, 126°C, 140°C and 150°C) selected from the temperature–composition (T–ϕ) phase diagrams and processing screw speed of 20, 100 and 200rpm. Extrudates were characterised using powder X-ray diffraction (PXRD), optical, polarised light and Raman microscopy. To ensure formation of a binary amorphous drug dispersion (ADD) at a specific composition, HME processing temperatures should at least be equal to, or exceed, the corresponding temperature value on the liquid–solid curve in a F–H T–ϕ phase diagram. If extruded between the spinodal and liquid–solid curve, the lack of thermodynamic forces to attain complete drug amorphisation may be compensated for through the use of an increased screw speed. Constructing F–H T–ϕ phase diagrams are valuable not only in the understanding drug–polymer miscibility behaviour but also in rationalising the selection of important processing parameters for HME to ensure miscibility of drug and polymer.KEY WORDS: DSC, Flory–Huggins theory, hot-melt extrusion, thermal processing     

Plasma lipidomic profiling in patients with rheumatoid arthritis

Introduction

Rheumatoid arthritis (RA) is linked to increased cardiovascular morbidity and mortality, not completely explained by traditional risk factors. Importantly, the increased risk occurs despite lower levels of total and low-density lipoprotein cholesterol. Whilst systemic inflammation may be a factor, it is possible that changes in individual lipid species contribute to the increased cardiovascular risk.

Objectives

In the present study, we characterized plasma lipidomic profiles in patients with RA in comparison with healthy controls.

Methods

Patients with RA (n = 32) and age- and gender-matched healthy volunteers (n = 84) were recruited. Fasting plasma lipid profiles were measured using electrospray-ionisation tandem mass spectrometry. 24 lipid classes and subclasses were measured.

Results

Patients with RA had normal total, low-density lipoprotein and high-density lipoprotein cholesterol, but higher triglycerides than controls. Five lipid classes (dihydroceramides, alkylphosphatidylethanolamine, alkenylphosphatidylethanolamine, lysophosphatidylinositol, phosphatidylserine) differed between patients with RA and controls. Then we measured 36 lipid species within these 5 classes and found that 11 lipid species were different between patients with RA and controls. Three lipid classes (dihydroceramides, lysophosphatidylinositol, phosphatidylserine) and 10 lipid species remained significantly associated with RA after adjusting for age, sex, body mass index, current smoking, systolic blood pressure and anti-hypertensive treatment in a binary logistic regression model.

Conclusion

This study has identified lipid alterations in RA. These alterations of lipids warrant further investigation as they may be associated with accelerated atherosclerosis and joint inflammation in patient with RA.

     

Discovery of A-type procyanidin dimers in yellow raspberries by untargeted metabolomics and correlation based data analysis

Introduction

Raspberries are becoming increasingly popular due to their reported health beneficial properties. Despite the presence of only trace amounts of anthocyanins, yellow varieties seems to show similar or better effects in comparison to conventional raspberries.

Objectives

The aim of this work is to characterize the metabolic differences between red and yellow berries, focussing on the compounds showing a higher concentration in yellow varieties.

Methods

The metabolomic profile of 13 red and 12 yellow raspberries (of different varieties, locations and collection dates) was determined by UPLC–TOF-MS. A novel approach based on Pearson correlation on the extracted ion chromatograms was implemented to extract the pseudospectra of the most relevant biomarkers from high energy LC–MS runs. The raw data will be made publicly available on MetaboLights (MTBLS333).

Results

Among the metabolites showing higher concentration in yellow raspberries it was possible to identify a series of compounds showing a pseudospectrum similar to that of A-type procyanidin polymers. The annotation of this group of compounds was confirmed by specific MS/MS experiments and performing standard injections.

Conclusions

In berries lacking anthocyanins the polyphenol metabolism might be shifted to the formation of a novel class of A-type procyanidin polymers.

     

Effect of experimental gingivitis induction and erythritol on the salivary metabolome and functional biochemistry of systemically healthy young adults

Introduction

Understanding the changes occurring in the oral ecosystem during development of gingivitis could help improve prevention and treatment strategies for oral health. Erythritol is a non-caloric polyol proposed to have beneficial effects on oral health.

Objectives

To examine the effect of experimental gingivitis and the effect of erythritol on the salivary metabolome and salivary functional biochemistry.

Methods

In a two-week experimental gingivitis challenge intervention study, non-targeted, mass spectrometry-based metabolomic profiling was performed on saliva samples from 61 healthy adults, collected at five time-points. The effect of erythritol was studied in a randomized, controlled trial setting. Fourteen salivary biochemistry variables were measured with antibody- or enzymatic activity-based assays.

Results

Bacterial amino acid catabolites (cadaverine, N-acetylcadaverine, and α-hydroxyisovalerate) and end-products of bacterial alkali-producing pathways (N-α-acetylornithine and γ-aminobutyrate) increased significantly during the experimental gingivitis. Significant changes were found in a set of 13 salivary metabolite ratios composed of host cell membrane lipids involved in cell signaling, host responses to bacteria, and defense against free radicals. An increase in mevalonate was also observed. There were no significant effects of erythritol. No significant changes were found in functional salivary biochemistry.

Conclusions

The findings underline a dynamic interaction between the host and the oral microbial biofilm during an experimental induction of gingivitis.

     

LncRNA NONRATT021972 involved the pathophysiologic processes mediated by P2X<Subscript>7</Subscript> receptors in stellate ganglia after myocardial ischemic injury

Adenosine triphosphate (ATP) acts on P2X receptors to initiate signal transmission. P2X₇ receptors play a role in the pathophysiological process of myocardial ischemic injury. Long noncoding RNAs (lncRNAs) participate in numerous biological functions independent of protein translation. LncRNAs are implicated in nervous system diseases. This study investigated the effects of NONRATT021972 small interference RNA (siRNA) on the pathophysiologic processes mediated by P2X₇ receptors in stellate ganglia (SG) after myocardial ischemic injury. Our results demonstrated that the expression of NONRATT021972 in SG was significantly higher in the myocardial ischemic (MI) group than in the control group. Treatment of MI rats with NONRATT021972 siRNA, the P2X₇ antagonist brilliant blue G (BBG), or P2X₇ siRNA improved the histology of injured ischemic cardiac tissues and decreased the elevated concentrations of serum myocardial enzymes, creatine kinase (CK), CK isoform MB (CK-MB), lactate dehydrogenase (LDH) and aspartate aminotransferase (AST) compared to the MI rats. NONRATT021972 siRNA, BBG, or P2X₇ siRNA treatment in MI rats decreased the expression levels of P2X₇ immunoreactivity, P2X₇ messenger RNA (mRNA), and P2X₇ protein, interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), and phosphorylated p38 mitogen-activated protein kinase (p38 MAPK) in the SG compared to MI rats. NONRATT021972 siRNA treatment prevented the pathophysiologic processes mediated by P2X₇ receptors in the SG after myocardial ischemic injury.     

Lack of functional P2X7 receptor aggravates brain edema development after middle cerebral artery occlusion

Effective therapeutic measures against the development of brain edema, a life-threatening complication of cerebral ischemia, are necessary to improve the functional outcome for the patient. Here, we identified a beneficial role of purinergic receptor P2X7 activation in acute ischemic stroke. Involvement of P2X7 in the development of neurological deficits, infarct size, brain edema, and glial responses after ischemic cerebral infarction has been analyzed. Neurologic evaluation, magnetic resonance imaging, and immunofluorescence assays were used to characterize the receptor’s effect on the disease progress during 72 h after transient middle cerebral artery occlusion (tMCAO). Sham-operated animals were included in all experiments for control purposes. We found P2X7-deficient mice to develop a more prominent brain edema with a trend towards more severe neurological deficits 24 h after tMCAO. Infarct sizes, T2 times, and apparent diffusion coefficients did not differ significantly between wild-type and P2X7^?/? animals. Our results show a characteristic spatial distribution of reactive glia cells with strongly attenuated microglia activation in P2X7^?/? mice 72 h after tMCAO. Our data indicate that P2X7 exerts a role in limiting the early edema formation, possibly by modulating glial responses, and supports later microglia activation.